I used a 0.25mm pad size blind via on a BGA pad with a 0.25mm size. I set a 0.1mm B/B stagger clearance in the physical constraints, but I am still getting a DRC error: "Minimum blind/buried via stagg...
Hello,We are a startup looking to develop an electronic lock and need a company to create the molds and plastic parts. Our product will be used on garbage containers, so it must be resistant to water ...
I have a connector which is an SMD part, although it has plastic mounting points which protrude through holes in the PCB. They do extend slightly beyond the bottom of the board.For assembly purposes, ...
Hi Mic I've just finished your voltage multiplier bom but unfortunately im just getting 10v of output for bias voltage, It supposed to be 60v with 3,3k. The only difference I've notice is that R14 is ...
Hello! I am also from Ukraine originally. Can I get a KiCad files for this project?I am Integrating it into my project and this would really help. Thank You!
I've submitted my pcb project to the contest, the participation award is a raspberry pico, when will I be emailed about this or get some kind of details?
https://www.pcbway.com/project/shareproject/Commodore_64_protected_power_supply.htmlhi your power supply, can you give me a link to some of the cases you are using ?thanks
Hi, do you have standard PCB stackup for multi-layer Rogers board? https://www.pcbway.com/multi-layer-laminated-structure.html seems to only have FR-4 stackups. Thank you!
